The purpose of this Blog

This blog is to detail my 50 years (1973 - 2023) with a 1928 Chevrolet tourer, affectionately called "The Red Chev".

The acquisition, restoration, improvements and my experiences over the years are covered in as much detail as I can remember.

Some of the later postings include car club outings and other vintage car items that I hope will be of interest to people.

If you have the time, scroll back to where it all began in 1973 and follow the journey so far.

Thanks for dropping by.

Regards Ray Dean


See my new section "The Red Chev - Repairs, Improvements, Maintenance and Technical Details" located on the left hand side of the screen.




Pages

Saturday, January 7, 2017

The Red Chev called in on Kevin (Kev's 28 Chev)

Dropped into Lilydale a few days back to take Kevin for a ride to rekindle his enthusiasm to get back into his 28 Chev restoration after time off for other projects.

We both enjoyed the drive and I look forward to both of us getting back into our respective 28 Chev restorations.








Below is Kevin's progress so far

As at 20th July, here are the latest pictures of Kev's Chev, going very well indeed.



















Monday, June 15, 2015


Kev's Chev - Another 1928 Aussie Chev being restored - Update 15th June 2015

Its been a little while since Kevin sent me some photos, but he has been steadily moving along with the restoration.

The story so far can be seen at
http://my28chev.blogspot.com.au/2015/03/kevs-chev-another-1928-aussie-chev.html

The latest pictures below Kevin sent me yesterday, and cover March to June.

































Update as at 9th March 2015 is posted below

Engine was cleaned and the old paint stripped off










Gearbox pre stripping




Cluster gears and bottom shafts in very good condition








Gear selector repaired and top tower pins replaced


New fully sealed front and rear bearings fitted and bronze bushing between input and output shaft


All back together ready to paint


After removing head have decided to have block bored out to 30 thou oversize and fit new pistons and rings




Head is good with new valves fitted


Original pistons. Bearings and lifters are serviceable and will be reused





My home made spray booth ready for work with the stripped chassis prior to sending away for sandblasting


The old paint looked ok  but peeled off 


Sandblasted and ready for painting


The painting process has began.


Next was the Gearbox


And at last the chassis, which came up very nice indeed.






Now let the assembly of this Chevy begin...............


Degreased inside and out


Ready for installing back in the housing


New sealed bearings fitted




All back together again


New propeller shaft bushing and locally sourced propeller seal fitted

Sunday, January 4, 2015

Working on replacing axle bearings with sealed bearings and replacing housing seals prior to sand blasting and painting of front and rear axle assemblies and chassis.












No comments:

Post a Comment